Penguin Cold Therapy Chiller with Filter Kit
The Penguin Cold Therapy Chiller is designed to keep your ice bath consistently cold without the hassle of hauling ice. Compact yet powerful, this U.S.-made chiller is a favorite for both beginners and seasoned cold therapy enthusiasts.
With 7,500 BTU/hr of cooling capacity, a built-in pump, and quiet 56 dBA operation, the Penguin Chiller can cool water down into the low 40°F range—and even into the high 30s with optimal conditions. Its rain-proof design makes it suitable for both indoor and outdoor use (except in freezing conditions).
Cost to Run
At $0.12/kWh, average monthly operating cost is approximately $18–$28. The compressor and fan only run when cooling is needed, reducing energy use. While placing the chiller on a timer may save $3–$5/month, doing so increases maintenance, water changes, and pump wear, making continuous operation the most efficient choice.
Performance Notes
- Maintains water in the low–mid 40°F range (can reach high 30s in ideal conditions)
- Performance is affected by sun exposure and ambient temperature—reduce heat load for best results
- Cold water slows bacterial growth, keeping water cleaner with less sanitizer
Setup Note: The chiller pump is not self-priming. Place the unit within 3' of the tub drain at the same or lower level as the tub bottom. Avoid elevating the chiller above the tub.
Penguin Cold Therapy Chiller Owner's Manual
Penguin Cold Therapy Chiller Installation Manual
Penguin Cold Therapy Chiller Filter Install Filter Kit Setup
